-Designed to minimize dust generation, this ground sensor can be used in clean rooms.
-Alarms with both light and sound to warn the user if a grounding problem is detected due to the plug being disconnected, a break in the grounding cord, or poor contact with the wearer¡¯s skin. ¡£
-A sensitivity adjustment knob lets you fine-tune the detection status to particular work areas.
-Stretchable band is easy to put on and take off. Available in two sizes (small/medium).
-Metal band is designed to minimize dust generation. Band length can be fine-tuned.
-Designed so that it can be used by individuals with a metal allergy. All metal surfaces touched by the wearer use stainless steel that is chemically formulated to be less likely to give off harmful nickel.
-Includes an LED to indicate remaining battery charge. A LOW BATTERY LED lights up when the remaining battery charge falls to 20% or below. The battery can be replaced.
-Can be used as a normal wrist strap without the battery.
-EPS-03M Approx.167 For use in clean rooms, general work environments, and by device operators 621398
-EPS-03S Approx.132 For use in clean rooms, general work environments, and by device operators 621399
-Resistance value£ºApprox. 2 M§Ù between the band and grounding cord
-Accessories£ºGrounding cord (EPC-18 with max. length of 1.8 m and 1 M§Ù current-limiting resistance)
-Test battery (already installed in CR1220)
-Alligator clip |