| | 6020 | 6030 | 6020/30 |
| Insulation
Test Specifications |
| Test
Voltage | 125V/250V | 250V/500V | 1000V |
Measuring
Ranges
(MΩ) | 0
~1.999MΩ
1.00 ~19.99MΩ
10.0 ~199.9MΩ | 0
~19.99MΩ
10.0 ~199.9MΩ
100 ~1999MΩ |
| (3
auto ranges) |
| Accuracy |
|±2%rdg
±3dgt, ±10%rdg (on 1000~2000MΩ) |
| Open
Circuit Voltage | +20%
-0% of Rated Test Voltage |
| Rated
Test current | 1mA
DC +20%-0% |
| Short
Circuit current | 1.3mA
DC approx. |
Effect
of AC Component
of Terminal Voltage | Within
±10% of reading when 5µF capacitor is connected
in parallel on insulation test |
| Overload
Protection | 1200V
(DC + ACp-p) for 10 seconds |
| Earth Resistance
Test Specifications |
| Measuring
Ranges(Ω) | 0
~199.9Ω
100 ~1999Ω (2 auto ranges) |
| Accuracy | |±2%rdg
±3dgt
(at 500Ω auxiliary earth resistance) |
| Measuring
Method | By
constant current inverter 820Hz approx. 2mA approx. |
| Overload
Protection | 200V
AC for 10 seconds between measuring terminals |
| Voltage
Test Specifications |
| Measuring
Ranges (V) | 0
~ 199.9/100 ~ 600V (2 auto ranges) |
| Accuracy | |±1%rdg
±4dgt |
| Sensing | True
RMS |
| Input
Impedance | 2MΩ |
| Overload
Protection | 900V
AC for 1 minute |
| Phase
Check Specifications |
| Measuring
Range |
100
~ 600V (50Hz/60Hz)
(for checking correct or reverse
phase and open phase) |
| General |
| Display | 3
1/2(1999)digit large LCD |
| Response
Time | Approx.
4 seconds for AC voltage and earth resistance tests
Approx. 5 seconds for insulation resistance tests. |
| Withstand
Voltage | 5550V
AC for one minute |
| Effect
of Drop | No
electrical and mechanical damage shall occur when the
unit
is dropped from a height of 1 m onto the concrete
floor. |
| Effect
of Temperature | Readings
shall not differ greater than specified below when taken
at a reference temperature of 23ºC and varied temperature
of 0ºC and 40ºC. AC Voltage 3% ±2 dgt
insulation resistance and earth resistance 5% ±2
dgt |
| Operating
Temperature Range | 0-40ºC |
| Dimensions | 130
× 238 × 207mm
(main body plus cord reel
module)
105 × 238 × 207mm (main body
only) |
| Weight | Approx.
1.6kg (main body only)
Approx. 750g (cord reel module
only) |
| Power
Supply | 1.5V
LR6 alkaline battery or equivalent × 8 (for main
body only)
1.5V LR6 alkaline battery or equivalent
× 1 (probe only) |
| Safety
Standard | IEC
61010-1 CAT.III 600V Pollution Degree 2 |
| Optional | 2417(Water
Proof Leakage Clamp Meter)
7093(Cord
for Extension Probe)
9080(Aluminum
Carrying Case) |
제 조 사
