TES-46 CAT-5 Lan Cable Tester
|
- Tests : UTP. FTP. Coax cables, two, three, or four wire
pairs in twisted pair cables and test
all category UTP cables and hardware.
- Verify end-to-end connectivity per EIA/TIA 568 wiring
standard.
- Detects wiring problems : Opens, Shorts, miswires (Crossed,
Reversed, Split pair).
- Locates wiring/connection errors (distance to the open or
shout)
- Measures cable length
- Easy to use only : One button to select the test and two
lines characters LCD display.
- Low battery, Auto power off, long battery life (60 hours
continuous)
|
Display |
Two lines characters LCD display (16
characters each) |
Connector |
RJ45 and BNC |
Category |
CAT5 |
Faults
Status |
Opens, Shorts, Reversed, Crossed, Split Pair. |
Test
Type |
TEST provides a pass / fail report on the cable under
test. In
case a failure has been detected, the display offers
additional
diagnostic information.
LENGTH provides the length of each pair (in case a twisted
pair
cable is being tested).
WIRE MAP provides the detail wiring for the cable. |
Cable
Length |
Range 2 to 999 ft or 1.0 to 350 m.
Resolution 1 ft or 0.5 m.
Accuracy 5% + 3 ft or 5% + 1 m |
Power |
6 pcs 1.5V size AAA alkaline battery. |
Input
Protection |
The inputs withstand telephone ringing and loop
voltages. |
Size
/ Weight |
152 mm x 72 mm x 35 mm / Approx. 360 g |
Environment
Conditions |
Operating : 0 ¡É to +50 ¡É , Storage : -20 ¡É to + 60
¡É |
Accessories |
Instruction manual , Carry case , One UTP Category 5
patch
cable, One RJ45F - RJ45F female coupler, Cable identifier
#1 for the verification of the wire map. |
|
|
|